Hubs & Parts

New old stock. After-market replacement for Sturmey Archer hubs. Has a wider fixing nut than the original, making tightening easier. Cable Clevis for Sturmey Archer 3 Speed Hub - NOS

New old stock. Replacement cable clevis for Shimano 3 speed hubs. Includes cable fixing bolt/nut, adjuster barrel, and lockring. Cable Clevis for Shimano 3 Speed Hub - NOS

Good condition. Rebuilt and fully functional. 36 hole. Manufactured in the early 1900's. Back pedal activated drum brake. 110mm OLD. Chrome shell has some pitting. 18 tooth cog shows significant wear. Lock nuts and outer axle nuts are not original. Drum brake grease port cover is intact. Drive side bearing...

Good condition. Hub is tested and working properly. 6 bolt brake rotor mount. Compatible with thread-on freewheel - not cassette. 36 spoke. BionX # 2288-A09198123. CANBUS compatible. BionX CRX35 rim is straight. 26in rim. There is one sidewall dent on the brake side of the rim. BionX Electric Bike 26in...

Good condition. Appears to be a complete set of internals for a Bendix 76 coaster brake hub minus one brake shoe. Includes a spare brake screw, clutch cone, and brake arm. Bendix 76 Coaster Hub Internals

Good condition. Hollow 10mm axle. 36 hole. Bearings are snug and smooth. Threaded shell for 5-6 Speed freewheel. 120mm over locknut diameter. Finish is moderately scuffed and scratched from use. Date stamped 1977. Made in France. Atom Threaded 5-6 Speed QR Rear Hub

Fair condition. Aluminum alloy hub shell - some minor blemishes on the finish from previous spokes. No bearings. Cones have some pitting and should be replaced. Axle is straight and threads are good. 36 hole. 5/16in axle. Approximately 93mm OLD. 72.6mm overall flange diameter. Altenburger High Flange...

New old stock. 5/16in axle diameter. 4 7/8in axle length. 24mm dust cap OD. 15mm cone OD. 20mm bearing cage OD. 12mm cone depth. Kit includes axle, cones, bearings, dust caps, spacers, washers, lock nuts, wheel fixing nuts. 5/16in x 4 7/8in Complete Front Hub Axle Set - NOS

New old stock. 3/8 inch x 26 threads per inch. 5/16in flats to accommodate anti-rotation drop-outs or safety washers. 130mm overall length. Fits many modern and vintage front bicycle hubs. Zinc plated. Silver. 3/8 inch x 26TPI Front Axle with Flats 130mm - NOS